China wire turnbuckle Manufacturers Factory Suppliers

MS Turnbuckle

Wire turnbuckle formwork is a kind of auxiliary tool used in aluminum formwork construction, the main function is to keep the wall vertical and horizontal by pulling the formwork turnbuckle on the...

Tilt Panel Props

The push pull brace is set around the perimeter of the building to maximize the use of structural materials and is an efficient and economical seismic structural element.

Push Pull Jack

The aluminum formwork push pull jack is composed of double rods, while the assembled push pull jack is composed of single rod, which is easy to adjust, simple to operate and stable.

Supporting Strut 2 Tubes 3 Supports

Adjustable Plumbing Brace Accessories of 2 Tubes 3 Supports. This plumbing brace can use just one tube or combine two tubes together. One tube need 2pcs of supports. If two tubes, need 3pcs of...

Aluminum Formwork Steel Supporting Strut

Turnbuckle/ Alignment Clamp with Telescopic Length is convenient to use in formwork panels supporting and in concrete formwork solution. It's use for safety support and easy to assemble and...

Adjustable Painted Push Pull Props

Adjustable Painted Push Pull Props is also called as tilt panel prop, it is safety procedures for the concrete formwork constructions. It can use by just one pipe, also it can use by one complete set.

Formwork Galvanized Plumbing Brace

Formwork Panel Galvanized Plumbing Brace is also known as tilt panel prop. One set = 2pcs of tubes + 3pcs of Supports + 4 sets of nuts. Tube Thickness 48mmx2.5mm. Material: Q235. Surface: Painted...

Aluminum Formwork Accessories Cureved Wedge

​Aluminum Formwork Accessories Curved Wedge mainly used to joint panels. We have original surface or zink surface. Have large stock and delivery time can be in one week. American type and korea...

Formwork Waler Clamp

Formwork Waler Clamp is also known as AL Clamp.
Different sizes waler clamps make planning easier and forming faster.:
●50mm* thickness: 4.0 mm
●50mm* thickness:...

Formwork Clamp Waler Bracket

​Installed on the back of back ridge, it holds the back ridge firmly to prevent it from falling. Use the wedge to shut the pin to the panels, have left side and right side.
EEQ Formwork...

Construction Accessories Waler Bracket

Construction Accessories Waler Bracket is easy use in aluminum formwork construction. It’s safty and economy. Tensile Strength ó bN/m㎡:325 ; Yield Strength ó 0.2N/m㎡:407; Elongation ó 5%: 40;...

Steel Formwork Diagonal Brace

Steel Formwork Turnbuckle Alignment Clamp is safety procedures for the concrete formwork constructions. Tube thickness:27mm. Adjust Height: 330-620mm. Weight:1.3KG. Material: Q235. Surface:...