China steel props for sale Manufacturers Factory Suppliers

Tilt Panel Props

The push pull brace is set around the perimeter of the building to maximize the use of structural materials and is an efficient and economical seismic structural element.

MS Turnbuckle

Wire turnbuckle formwork is a kind of auxiliary tool used in aluminum formwork construction, the main function is to keep the wall vertical and horizontal by pulling the formwork turnbuckle on the...

Hex Cap Screw Bolt

K plate hex cap screw bolt are the embedded parts of the building. It is used to lock the kicker plate in the concrete to serve as a stepping stone for the next floor and adjust the level of the wall.

Push Pull Jack

The aluminum formwork push pull jack is composed of double rods, while the assembled push pull jack is composed of single rod, which is easy to adjust, simple to operate and stable.

Concrete Formwork System Panel Puller

Panel Puller is a common use tool to pull panels, it is also used to adjust outside panels, pull and connect floor and ceiling panels, pull and assemble beam to beam and wooden panels.

Construction Accessories Bolt With Nut

Construction Accessories Bolt With Nut, Washer. 4.8 Grade, 8.8 Grade, 10.9 Grade and 12.9 Grade for chooose. Surface:Natural, Galvanized, Blackened. Diameter: M6-M72. Length: 16mm-300mm. Short...

Supporting Strut 2 Tubes 3 Supports

Adjustable Plumbing Brace Accessories of 2 Tubes 3 Supports. This plumbing brace can use just one tube or combine two tubes together. One tube need 2pcs of supports. If two tubes, need 3pcs of...

Aluminum Formwork Steel Supporting Strut

Turnbuckle/ Alignment Clamp with Telescopic Length is convenient to use in formwork panels supporting and in concrete formwork solution. It's use for safety support and easy to assemble and...

Adjustable Painted Push Pull Props

Adjustable Painted Push Pull Props is also called as tilt panel prop, it is safety procedures for the concrete formwork constructions. It can use by just one pipe, also it can use by one complete set.

Formwork Galvanized Plumbing Brace

Formwork Panel Galvanized Plumbing Brace is also known as tilt panel prop. One set = 2pcs of tubes + 3pcs of Supports + 4 sets of nuts. Tube Thickness 48mmx2.5mm. Material: Q235. Surface: Painted...

Aluminum Formwork Wall Tie 3.0mm

Aluminum Formwork Wall Tie 3.0mm thickness can be recycle use in formwork panel construction. Material : G50A. Tensile Strength: 850N.Yield Strength 620N.Stress 480N. Thickness:3mm. It’s not easy...

Steel Formwork Diagonal Brace

Steel Formwork Turnbuckle Alignment Clamp is safety procedures for the concrete formwork constructions. Tube thickness:27mm. Adjust Height: 330-620mm. Weight:1.3KG. Material: Q235. Surface:...