China wire rope turnbuckles and eye bolts Manufacturers Factory Suppliers

MS Turnbuckle

Wire turnbuckle formwork is a kind of auxiliary tool used in aluminum formwork construction, the main function is to keep the wall vertical and horizontal by pulling the formwork turnbuckle on the...

Tilt Panel Props

The push pull brace is set around the perimeter of the building to maximize the use of structural materials and is an efficient and economical seismic structural element.

Push Pull Jack

The aluminum formwork push pull jack is composed of double rods, while the assembled push pull jack is composed of single rod, which is easy to adjust, simple to operate and stable.

Wall Thickness 200MM Wall Tie Concrete

Wall Thickness 200mm wall tie concrete steel flat tie is popular use in construction, we can provide wall tie drawing according to the thickness of your construction for you to confirm,...

Aluminum Formwork Painted Channel Walers

Aluminum Formwork Painted Channel Walers, steel walers are use in aluminum formwork system. Double Tube of walers will be installed to ensure the support channels. Material: Q235.

Supporting Strut 2 Tubes 3 Supports

Adjustable Plumbing Brace Accessories of 2 Tubes 3 Supports. This plumbing brace can use just one tube or combine two tubes together. One tube need 2pcs of supports. If two tubes, need 3pcs of...

Aluminum Formwork Steel Supporting Strut

Turnbuckle/ Alignment Clamp with Telescopic Length is convenient to use in formwork panels supporting and in concrete formwork solution. It's use for safety support and easy to assemble and...

Adjustable Painted Push Pull Props

Adjustable Painted Push Pull Props is also called as tilt panel prop, it is safety procedures for the concrete formwork constructions. It can use by just one pipe, also it can use by one complete set.

Formwork Galvanized Plumbing Brace

Formwork Panel Galvanized Plumbing Brace is also known as tilt panel prop. One set = 2pcs of tubes + 3pcs of Supports + 4 sets of nuts. Tube Thickness 48mmx2.5mm. Material: Q235. Surface: Painted...

Recyle Aluminum Formwork System Wall Tie

Recycle Aluminum Formwork System Wall Tie is easy use in aluminum formwork construction. It’s safety and economy. Tensile Strength 850N; Yield Strength 620N; Stress SpN: 480N; Thickness: 3.0mm....

Steel Formwork Diagonal Brace

Steel Formwork Turnbuckle Alignment Clamp is safety procedures for the concrete formwork constructions. Tube thickness:27mm. Adjust Height: 330-620mm. Weight:1.3KG. Material: Q235. Surface:...

Anchor Nut Combine Plate Nut

Anchor Nut Combine Plate Nut named wing nut or tie nut, is easy used in construction formwork pannel. EEQ formwork can produce according different tie rod size: Φ12, Φ14, Φ16, Φ17, Φ18, Φ20, Φ23, Φ25.