Home / Products / Formwork Accessories / Wall Tie / Content

Products

Recyle Aluminum Formwork System Wall Tie

Recyle Aluminum Formwork System Wall Tie

Recycle Aluminum Formwork System Wall Tie is easy use in aluminum formwork construction. It’s safety and economy. Tensile Strength 850N; Yield Strength 620N; Stress SpN: 480N; Thickness: 3.0mm. Material G50N. Can produce according your size.

Send Inquiry

Fast Delievery
Quality Assurance
24/7 Customer Service

Product Introduction

Introduction

The Recyle Aluminum Formwork System Wall Tie are very commonly used in construction. Secondly, the advantage of my mom is light weight and easy to assemble and disassemble. Wall ties are much easier to assemble and disassemble compared to butt ties and butt nuts. What's more, we also performed tensile testing and compression testing to ensure the correct mechanical properties of the aluminum material. Finally, we also weigh the samples so that they are within weight tolerances and we can produce the wall ties strictly according to your drawings.

Feature

The internal crystals of Recyle Aluminum Formwork System Wall Tie block the compact arrangement and therefore have good plasticity and toughness. Secondly, the surface of our products is very smooth and has the characteristics of no roughness. More importantly, our products are also easy to remove and install. Finally, our products are suitable for all construction sites.

Product Specification:

PIC	WALL THICK	THICK	WIDTH	MATERIAL	WEIGHT KG	PACKING
	125	3 mm	40 mm	G50A	0.294	WOODEN PALLET
	150	3 mm	40 mm	G50A	0.31	WOODEN PALLET
	175	3 mm	40 mm	G50A	0.334	WOODEN PALLET
	200	3 mm	40 mm	G50A	0.395	WOODEN PALLET
	250	3 mm	40 mm	G50A	0.44	WOODEN PALLET
	300	3 mm	40 mm	G50A	0.488	WOODEN PALLET

Application

(1)

Packing:

Products Certification:

Mill Certification

Product	Wall Tie 175mm thk. Wall	Size	175mm thk. Wall	Quantity	25000
Material	G50A	Source Of Material	Handan Iron & Steel Group Co., Ltd.
Material Equivalent
Tensile Strength N	850	Standard	GB/T228.1-2010	Issued Date	2022.01.20
Mechanical Proverty
Tensile Strength ó bN/m㎡	Yield Strength ó 0.2N/m㎡	Stress SpN/m㎡	Elongation ó 5%	Impact Rate AKJ	Hardness H RC
850	620	480	10		220
C	S	P	Si	Mn	Cr
0.48	0.035	0.036	0.22	0.8	0.28
Remark:
We hereby certify that product described herein has been made in Accordance with standards and specification specified by you that satisfise the requirement.