-
![Flat Tie Panel Steel Wall Tie]()
Flat Ties are used to connect 2 pieces aluminum panels in formwork system. There are 2 holes at both side end, they can be shutting by formwok pin and wedge, strong quality flat tie with good raw...
Add to Inquiry -
![Kicker Nut]()
One-time use kicker nut, also known as disposable kicker nuts or starter nuts. This kicker nut is intended for single use and to lock the K plate in the concrete to give the next floor to the role...
Add to Inquiry -
![Mivan Wall Tie]()
The wall tie mivan is a thin steel sheet. During the construction of concrete, the aluminum formwork panels on both sides can be "pulled" tightly to prevent the modular increase and mold explosion...
Add to Inquiry -
![Concrete Form Flat Ties]()
Concrete form flat ties system mainly uses embedded ties, pre-buried to the wall after demoulding.
Add to Inquiry -
![Reusable Flat Tie]()
Compared with the threaded screw system, flat tie does not require drilling, and the wall will not leave holes after demolition of the mold, which greatly reduces the risk of leakage of the...
Add to Inquiry -
![Flat Tie]()
Flat ties prevent moisture in walls, prevent wall leaks, ensure the cleanliness of walls, make them less susceptible to dust, protect the decorative nature of walls, and improve the durability of...
Add to Inquiry -
![Wall Thickness 200MM Wall Tie Concrete]()
Wall Thickness 200MM Wall Tie Concrete
Wall Thickness 200mm wall tie concrete steel flat tie is popular use in construction, we can provide wall tie drawing according to the thickness of your construction for you to confirm,...
Add to Inquiry -
![Recyle Aluminum Formwork System Wall Tie]()
Recyle Aluminum Formwork System Wall Tie
Recycle Aluminum Formwork System Wall Tie is easy use in aluminum formwork construction. It’s safety and economy. Tensile Strength 850N; Yield Strength 620N; Stress SpN: 480N; Thickness: 3.0mm....
Add to Inquiry -
![Disposable Aluminum Formwork Snap Tie]()
Disposable Aluminum Formwork Snap Tie
Disposable Aluminum Formwork Snap Tie is a new choice for construction.
We have large stock of different sizes. It can suit different construction require. Our production lines can...Add to Inquiry -
![Flat Tie Wall Tie for Concrete formwork]()
Flat Tie Wall Tie for Concrete formwork
Flat Tie Wall Tie For Concrete Formwork with pin, steel beam bar, wedge, waler clamp are used to lock formwork panels. It’s popular in formwork system and easy use and assembly. We also have...
Add to Inquiry -
![Aluminum Formwork Wall Tie 3.0mm]()
Aluminum Formwork Wall Tie 3.0mm
Aluminum Formwork Wall Tie 3.0mm thickness can be recycle use in formwork panel construction. Material : G50A. Tensile Strength: 850N.Yield Strength 620N.Stress 480N. Thickness:3mm. It’s not easy...
Add to Inquiry -
![Aluminum Form Tie]()
Aluminum Form Tie Manufacture In Hebei, formwork accessories factory. GB/T 19001-2016 / ISO 9001:2015, GB/T 50430-2017 Certification. Wall tie, form tie, alightment bracket, waler clamp, tie nut,...
Add to Inquiry
Arla Dubuc
Ralph Toliver
Stanley Nielsen
Gregory Bauer
Eric Mullen
Betty Small
the x flat wall tie as formwork accessories, made concrete wall thickness uniform. The material as customer's requirement. Q235, steel 45# , 20Mn and so on. The length can be customized according to...
Jun 21, 2022 · Jun. 21, 2022 The Flat Tie is used for steel forming system. It has different length from 100L-1200L and different thickness from 1.7mm-2.0mm. With the continually perform quality...
X Flat Ties X Flat Ties are used with Wedge Bolts to secure and space modular forms. X Flat ties are available in 6″ up to 84″ in 1/2″ increments. Standard breakback is 1/4″. Base Ties Base...
X Flat Ties X Flat Ties are used with Wedge Bolts to secure and space modular forms. X Flat ties are available in 6″ up to 84″ in 1/2″ increments. Standard breakback is 1/4″. Base Ties Base Ties are...
steel fillers to panels and fillers. Works well . when 2 steel fillers are next to each other. X Flat Tie . Standard Flat Tie : 4-48" Other Size . Available . Ultimate 6000lbs. X Flat Tie is used to...
Available with 1″ x 1″ cones (plastic), washers (metal) and water resistant seal options. Coil Ties 2-Strut and 4-Strut, Standard and Heavy-Duty capacity Coil Ties, designed for job-built plywood...
