China Embedded Ties Manufacturers Factory Suppliers

Concrete Form Flat Ties

Concrete form flat ties system mainly uses embedded ties, pre-buried to the wall after demoulding.

Mivan Wall Tie

The wall tie mivan is a thin steel sheet. During the construction of concrete, the aluminum formwork panels on both sides can be "pulled" tightly to prevent the modular increase and mold explosion...

Reusable Flat Tie

Compared with the threaded screw system, flat tie does not require drilling, and the wall will not leave holes after demolition of the mold, which greatly reduces the risk of leakage of the...

Flat Tie

Flat ties prevent moisture in walls, prevent wall leaks, ensure the cleanliness of walls, make them less susceptible to dust, protect the decorative nature of walls, and improve the durability of...

Flat Tie Panel Steel Wall Tie

Flat Ties are used to connect 2 pieces aluminum panels in formwork system. There are 2 holes at both side end, they can be shutting by formwok pin and wedge, strong quality flat tie with good raw...

Wall Thickness 200MM Wall Tie Concrete

Wall Thickness 200mm wall tie concrete steel flat tie is popular use in construction, we can provide wall tie drawing according to the thickness of your construction for you to confirm,...

Aluminum Formwork New Design Pin

EEQ Third-Generation New Type Pin is as strong as solid pin, but lighter weight and saving cost about 20%-30%.

Recyle Aluminum Formwork System Wall Tie

Recycle Aluminum Formwork System Wall Tie is easy use in aluminum formwork construction. It’s safety and economy. Tensile Strength 850N; Yield Strength 620N; Stress SpN: 480N; Thickness: 3.0mm....

Disposable Aluminum Formwork Snap Tie

​Disposable Aluminum Formwork Snap Tie is a new choice for construction.
We have large stock of different sizes. It can suit different construction require. Our production lines can...

Flat Tie Wall Tie for Concrete formwork

Flat Tie Wall Tie For Concrete Formwork with pin, steel beam bar, wedge, waler clamp are used to lock formwork panels. It’s popular in formwork system and easy use and assembly. We also have...

Aluminum Formwork Wall Tie 3.0mm

Aluminum Formwork Wall Tie 3.0mm thickness can be recycle use in formwork panel construction. Material : G50A. Tensile Strength: 850N.Yield Strength 620N.Stress 480N. Thickness:3mm. It’s not easy...

Aluminum Form Tie

Aluminum Form Tie Manufacture In Hebei, formwork accessories factory. GB/T 19001-2016 / ISO 9001:2015, GB/T 50430-2017 Certification. Wall tie, form tie, alightment bracket, waler clamp, tie nut,...