-
A. The formwork wing nut is mainly used in building template projects, and combined with other architectural materials to fix the building templates.
Add to Inquiry -
The structure of the flange nut for tie rod is relatively simple. It consists of a circular nut and a plane padding. It is easy to install and does not require many tools and skills.
Add to Inquiry -
Concrete form flat ties system mainly uses embedded ties, pre-buried to the wall after demoulding.
Add to Inquiry -
Hex couplers are mechanical devices used to couple two threaded rods or bolts together.
Add to Inquiry -
Flat Ties are used to connect 2 pieces aluminum panels in formwork system. There are 2 holes at both side end, they can be shutting by formwok pin and wedge, strong quality flat tie with good raw...
Add to Inquiry -
Pin For Formwork System Semi Hollow
Semi Hollow Pin for Formwork System is popular use in construction.
There are different size for choosing, there is one popular type connect the pin and wedge with a rope to prevent it from...Add to Inquiry -
Flat Tie Wall Tie for Concrete formwork
Flat Tie Wall Tie For Concrete Formwork with pin, steel beam bar, wedge, waler clamp are used to lock formwork panels. It’s popular in formwork system and easy use and assembly. We also have...
Add to Inquiry -
Formwork System Tie Rod Nut is formwork accessories. It has many types like Wing Nut, Anchor Nut, and Hex Nut. Normal diameter is 80mm and 90mm with different screw diameter. Forged by QT400-500....
Add to Inquiry -
Forged Wing Nut for 15/17mm Tie Rod
Forged Wing Nut for 16/17/18/22mm Tie Rod. We have wing nut for tie rod Φ16,Φ17,Φ18,Φ22. Surface galvanized. They can be fixed and loosened when assembly formwork concrete systems. We also offer...
Add to Inquiry -
Hex Nut for Formwork Tie Rod System
Hex Nut for Formwork Tie Rod System, it includes Tie Rod, Tie Nut, Water Stop Nut, Steel Cone and Washer Plate. As normal it is used with the square washer plate. Thickness: 37.5mm, Diagonal size:...
Add to Inquiry -
Anchor Nut Combine Plate Nut named wing nut or tie nut, is easy used in construction formwork pannel. EEQ formwork can produce according different tie rod size: Φ12, Φ14, Φ16, Φ17, Φ18, Φ20, Φ23, Φ25.
Add to Inquiry -
Concrete formwork Connection Nut
EEQ Concrete Formwork Connection Nut has high tensile strength of 200KN, connection with tie rod. We can offer many kinds of anchor connection nuts according your size and weight.
Add to Inquiry












