How to make scaffold erection safer
May 11, 2022
Scaffolds are common in our daily life. Generally, they can be seen on the construction site. In fact, they are dangerous to operate. How to ensure the safety of Suzhou steel pipe scaffolds? It is a topic that many builders have been concerned about, because the safety of scaffolding is very important. In recent years, scaffolding safety accidents have been frequent, which has also sounded an alarm for us. In addition to the quality of scaffolding itself, the use of scaffolding is also crucial. So how can we better use scaffolding?
1、 Additional protective measures
In the construction of high-rise buildings, the outer frame shall be covered with bamboo fence pieces or steel mesh at each step of operation. In addition, 1m high railings and bamboo fence boards shall be set outside. A safety net shall be set outside the scaffold.
2、 Floor protection measures
Now the most common is the concrete frame engineering, they generally use steel tube to support the steel formwork construction. In order to protect the floor construction, the floor protection frame can be used. The protective frame is equivalent to the height of two floors of the building, and the width of the protective frame is equivalent to the length of one bay of the building.
3、 Protective measures for floor cantilevered frame
Some concrete frame high-rise buildings, due to the lack of lifting equipment, are not convenient to install the floor protection frame, so they use steel formwork for support. It is better to set up an inclined cantilever frame around the building, the vertical height is the same as that of the construction building, and a large cross bar is set up on the cantilever frame to fully pull the safety net obliquely.
4、 Protective measures for socket rack
For some high-rise buildings, when the construction method of external hanging and internal pouring or cast-in-place reinforced concrete shear wall is adopted, in order to ensure the safety of construction personnel. The tool type socket rack can be used. The height of the socket rack is more than one floor, which can prevent the workers around the construction floor from falling outward.
